Da Er Long (Guangzhou) Co., Ltd -

Da Er Long (Guangzhou) Co., Ltd

Showing 41 - 50 of 59, total 6 pages [First] [Previous] [Next] [Last]

injection machinery
Specification: Horizontal type
Detail: Item:SP136 Control mode:PLC The material of feeder:Stainless steel(304 ) The capacity of materials feeding for one time(g):5-250 Dimension（cm):110X100X145 The pressure of the first materials feeding（kg/㎡）:50-80(ad...

medical catheter opened tip forming machine
Specification: Used on Medical tube
Detail: ***ails: The main parts are import from Europe,and used for tip cutting on feeding tubes,suction tubes,stomach tubes and Foley catheters etc. Including 17 pcs moulds. Can produce 1200pcs tubes per hour.

chiller
Specification: Used on Endotracheal tube
Detail: ***ails: Supply cooling water for melt machine and high frequency induction heating machine. Power distribution:220V Compressed air:without air Sizes:500MM*1000MM*1900MM

endotracheal tube bending oven
Specification: Used on Endotracheal tube
Detail: ***ails: 1.This bank is used for bending the tubes,make them bending, such as endotracheal tube. 2.Power distribution:220V,1.5KW,6copper core. Compressed air:without air Capacity:800-1000pcs/hours. Sizes:1200MM*740MM*1...

endotracheal tube tip forming machinery
Specification: Used on tipping for Endotracheal tube
Detail: 1.Equipment configuration: The machine is used the mature and stable hot air heating forming, The design of machine is more flexible and mature and stable hot air heating energy regulation and step-by -step tubes pushing syst...

endotracheal tube balloon bonding machinery
Specification: Used on Endotracheal tube
Detail: Equipment configuration: The machine is quipped with European heat source forming system, screen touch controlling system and Mitsubishi PLC control system .The machine with a stable performance and low fault rate. Production...

endotracheal tube murphy hole punching machine
Specification: Used on Endotracheal tube
Detail: Equipment configuration: Using mature and stable hot melting punch forming technology, Mitsubishi PLC control system, the disposition is high, the performance is stable, safe and low failure rate. Production capacity: 800~150...

endotracheal tube machinery
Specification: Used on Endotracheal tube
Detail: ***ails: The main parts are imported from Japan, There are not burrs cause inside and outside of the forming holes, after forming the surface of inside and outside is smooth, the aperture size is consistent, high efficienc...

endotracheal tube and foley catheter check valve
Specification: Used on Medical tube
Detail: Applicable: foley catheter, endotracheal tube and anesthesia mask etc. Size:7.3mm(287 inch)OD Material: PVC/silicone/ABS / 316 stainless steel Product description: standard 6:100 ruler taper, according with GBT1962.1-200...

medical catheter induction heating clsoed tip for
Specification: Used on Medical tube
Detail: Equipment configuration: The machine is used the most advanced forming technology from USA, the heating forming technology is very stable. Mitsubishi PLC control system makes the machine more stable. Cooperate with the acc...


Showing 41 - 50 of 59, total 6 pages [First] [Previous] [Next] [Last]
1 2 3 4 5 6